High Precision Industrial Wheel Loader Electronic Bucket Weigh
Scale
Main Features:
EMC design with high anti-jamming capability, suitable for
industrial environment.
DC24V power input circuit with reverse polarity protection
function.
32-bit ARM CPU with 72MHz & high arithmetic speed.
Dust-proof stainless steel shell with protection level IP65.
640×480 TFT color display screen for English character display.
The display informations of Bucket Lifting/Declining state,
Single-bucket-loading-weight, Totalized Loading Weight,
Positive/Negative Deviation Value, Alarm state, Date/Time and other
auxiliary data are used for judging if Single-bucket-loading-weight
is valid and the loading process should be stopped.
20-key English keypad with controllable backlight.
Number and English Alphabet can be inputted.
The informations of User Name, Truck No., Goods No. and Operator
No. can be inputted.
Upper/Lower Limit of Single-bucket-loading-weight, Setpoint of
Totalized Loading Weight and Date/Time can be set.
Operating Time, Single-bucket-loading-weight, Totalized Loading
Weight and Alarm Information can be recorded automatically.
Using two oil pressure sensors for higher weighing accuracy than
using one.
24-bit Σ-△ADC with internal resolution 1/1,000,000 and sampling
frequency 400Hz.
High sampling frequency, anti-vibration digital filter and
acceleration compensation algorithm for ensuring high weighing
accuracy in the lifting process of the bucket.
10000 Loading Records can be saved, queried and printed, and each
record can contain 50 Single-bucket-loading-weight value.
High-Frequency
What product does the whole set include?
- 1 Weighing indicator with Built-in thermal printer.
- 1 Position sensor.
- 2 Oil pressure sensors.
- 2 Plate type three-way joints.
- 1 Mounting fitting.
BST106-N59[B] Suitable for the wheel loader series with loading
capacity 1~12t.
Specifications of Position Sensor
- HALL Type Proximity Switches
- Operating Voltage: DC5~24V.
- Detecting Distance: 1~8mm.
- Response Frequency: 5KHz.
- Quiescent Current:Max. 2mA.
- Thread Size: M8×1mm.
- Service Temperature: -25℃~+70℃.
- Protection Level: IP67.
Standard Detecting Target
- Permanent magnet.
- Outline Size: 30×10×5mm [L×W×T].
Specifications of Oil Pressure Sensor
- Operating Voltage: DC5V.
- Capacity: 0~25MPa.
- Accuracy: ±0.1%FS.
- Output Sensitivity: 2mV/V.
- Zero Drift: ±0.015%FS/℃.
- Safe Overload: 120%FS.
- Thread Size: M10×1mm.
- Service Temperature: -40℃~+125℃.
- Protection Level: IP67.
System Accuracy
- Accuracy Grade: III.
- Verification Accuracy of Weighing Indicator: 0.02%.
- Accuracy of Single-Bucket-Weight: 0.5%~1.0%.
- Accuracy of Totalized Loading Weight: 1.0%.
Technical Specifications:
| Display | 640×480 TFT color display screen for English character display |
| Weight Display Range | -99,999~+999,999 |
| System Weighing Range | 100~12,000kg |
| Scale Division | Optional 1, 2, 5, 10, 20, 50kg |
| Display Resolution | 1/100,000 |
| Position Sensor Input Interface | 2 Switch signal Input |
| Output Voltage | DC12V |
| Max. Output Current | 100mA |
| Oil Pressure Sensor Interface | 2 Switch signal Input |
| Excitation Voltage/Max.Current | DC12V/100mA & DC5V/100mA |
| Signal Input Range | Optional 0~20mV, 0~5V[Factory Set Value] |
| ∑-△ADC | 24-bit, 1,000,000 internal code used |
| Sampling Frequency | 400Hz |
| Non-linearity | 0.005%FS |
| Digital Communication Interface | COM1 | RS232 |
| Report Print | 10000 Loading Records can be saved, queried and printed, and each
record can contain 50pcs Single-bucket-loading-weight value |
| IP Grade | IP65 |
NEW Shovel Loader Weighing Controller BST106-N59[B] is with metal
oil pressure sensor pipe and metal position sensor pipe. It can be
extend its service life effectively. There are some point need to
be paid attention to when making order:
1. If you need longer pipe, pls tell us exact length when making
order;
2. If the three-way joint of your loader is special, please tell us
the model number the loader you want o install or please send us
the detail information of theree-way jointyou need;
3. Standard configuration is with built-in printer, if you want to
connect a printer externally, that is ok, just tell us when making
order please.
FAQ:
1. What detailed information do I need to provide if I want to
place an order?
We need to know the following information: the model number of the
loader you want to install, the shape and size of cylinder joint of
your loader, the weight of single bucket, accuracy etc.
2. Do you have any discount?
Yes, if you buy large QTY, please send us a email, we will give you
a big discount.
3. What terms of payment are available?
We accept T/T, L/C, Trade assurance, Secure payment, Western
Union,etc.
4.When will you arrange the production?
We will arrange the production immediately after receiving your
payment.
5. How do you ensure good product quality?
We have a complete quality control system, all of our products are
fully checked by IQC, OQC departments before shipping to our
clients.
6. How long is the warranty period?
The warranty period for our products is 12 (twelve) months.
If the products from SUPMETER are proved to be unable to work
normally due to unartificial reasons, and the problems can't be
solved by customers under the technical support from SUPMETER, then
customers can send the problematic items back to SUPMETER. SUPMETER
is RESPONSIBLE to MEND (or REPLACE when necessary) them FREE OF
CHARGE.
(Note: if after checking, the returned goods are proved to be in
good condition, the trouble is resulted to be caused by improper
operation by customers, SUPMETER is IRRESPONSIBLE to bear the
shipping & other charges related to the returning.)
7. How can you help us in installation?
We have installation vedio. And we have been working on this more
than 5 years. We will help you solve the problem in installation
with our expirience.
