New Developed Load Cell Control Unit Guide Rail Weighing/Force
Measuring Control Module With CANBUS BST106-M60S(L)
BST106-M60S[L] Guide Rail Type
Weighing / Force Measuring Control Module
Weight/Force Display, Peak Value Detection / Display Holding,
Auto Weight-checking, Setpoint DO Output, AO/Digit Transmission
Main Features:
1. Applications: Weight/Force Display, Peak Value
Detection&Display Holding, Auto Weight-checking, Setpoint DO
Output and AO/Digit Transmission.
2. Max. Connection Quantity: 8 Loadcells (350Ω).
3. Zero Upon Power Up, Zero Auto-tracking, Manual/Auto Zero and
Zero Calibration available.
4. Load Calibration, Data Calibration, Segmenting Span Correction
and Segmenting Weight Calculation available.
5. Auto-locking, Key-locking, Key-unlocking, Digital
Setting&Calibration and I/O Testing functions available.
6. 3 Definable normally open switch inputs [DI] and 3 definable
normally open transistor switch outputs [DO].
7. 1 Optional&definable current signal output [AO: 0~20mA].
8. 1 Optional&definable voltage signal output [VO: 0~10V].
9. RS232, optional RS485 and CANBUS communication ports for
connecting Host IPC/PLC and LED Remote Display.
Display
1. 6+6 Red LED digital tubes for English character and digit
display.
2. Weight Display Range: -9,999~+99,999.
3. Scale Capacity: Setting Range 1~99,999.
4. Scale Division: Optional 1, 2, 5, 10, 20, 50, 100, 200, 500.
5. Display Resolution: 1/50,000.
6. Decimal Point Position: Optional 0, 0.0, 0.00, 0.000, 0.0000.
7. Display Refreshing Time: Setting Range 0.01~1.00s.
Keypad
1. 4-key English keypad for Menu&Shortcut mode operation.
Weighing Signal Interface
1. Excitation Voltage/Max. Current: DC5V/120mA [8-350Ω loadcells].
2. Signal Input Range: 0~12.5mV.
3. Output Sensitivity of Loadcell: 1.0~2.5mV/V.
4. 24-bit ∑-△ADC with internal resolution 1/1,000,000.
5. Optional Sampling Frequency: 3200Hz, 1600Hz, 800Hz, 400Hz,
200Hz, 5Hz.
6. Special Anti-vibration Digital Filtering Algorithm for precise
weighing, stable display and rapid response.
7. Zero Drift: ±0.1μV/℃ RTI (Relative to Input).
8. Gain Drift: ±5ppm/℃.
9. Non-linearity: 0.005%FS.
Keypad Operation
| Key Name | Function | Description |
| 【■】 | 【MENU】 | Enter Main Menu / Exit. |
| 【LOCK】* | Key-locking / Key-unlocking. |
| 【►】 | 【►】 | Cursor shifts right. Display the previous interface or option. |
| 【ZERO】* | Manual Zero without Power-down Protection. |
| 【▲】 | 【▲】 | Display the next interface or option. Digit input: +1 ( 0~9 loop). |
| 【SET】* | Setpoint Parameters Setting. |
| 【8】 | 【ENT】 | Enter / Save / Clear Alarm. |
| 【CLS】* | Clear Screen [Clear the display value of Peak Hold Value and
Weight-checking Value]. |
User Interface Diagram
Installation
Terminal
| No. | Pin | Description |
| LOADCELL | Loadcell Port |
| 1 | S- | Weighing Signal Input +. |
| 2 | S+ | Weighing Signal Input -. |
| 3 | E- | Excitation Voltage -. |
| 4 | E+ | Excitation Voltage + [DC5V]. |
| 5 | SHD | Shield Ground. |
| DI/DO | Switch Input/Output Port [Definable] |
| 6 | DI1 | Switch Signal Input 1. |
| 7 | DI2 | Switch Signal Input 2. |
| 8 | DI3 | Switch Signal Input 3. |
| 9 | DO1 | Normally Open Contact Output 1. |
| 10 | DO2 | Normally Open Contact Output 2. |
| 11 | DO3 | Normally Open Contact Output 3. |
| 12 | COM | DI/DO Common Terminal. |
| Contact Capacity of Transistor Switch: DC24V, 250mA. |
Delivery
